It took a while to find the part I needed but I did manage to change a brake light bulb that had burned out on my wife’s car. Took all of four minutes once I had the correct bulb in hand. I spent more time looking for a part number than I did doing much of anything else, other than driving to & from Canadian Tire. For less than $8.00 I made it street legal once more. All I needed were two different types of screw driver, and about four minutes time. Glad we can avoid any sort of traffic ticket regarding the tail lights. Go team!
I always wanted to learn more about cars, but those would be the types of vehicles from the 90’s, you know the pre-computer regulates everything, type of cars & trucks. When you had more mechanical solenoids to regulate operations in your car, and not lines of code. It’s a shame you can’t just bust out a bridgeport mill & welder to fix parts any more. Not that I can do much with either at the moment, but I can learn! Now it’s all cameras and touch screens and plastic, or polycarbonate this, that, and the other. Planned obsolescence and all that greedy bullshit. Bah! Beside changing my tires, light bulbs, and adding fluids, or an oil change there isn’t much i can do to fix any of our vehicles. Wouldn’t mind learning how to do brakes, and rotors, but if you fuck that up you crash and potentially kill people.
Oh, since the weather has managed to climb just over 0° C recently I have once again been able to pick up the Urn build for brief stints. It is going to require a fair amount of TLC, for the cold weather glue ups that left residue behind. Glad I’m just clear coating and not staining this, as it would wind up being streaky AF. I have the top tray built, glued & assembled. I went with a Royal blue felt liner. Looks tasteful. I felt the green might be too “Machinists Tool Box”, so blue it is! I have to shave down the tops a bit for a suitable flush final fit. Then I need to plug pin nail head holes, add any final trim, and build the cap/lid/cover. Then sand until I’m sick to death of doing so. Then add the high polished clear coat finish.
I also have the fence topping moose for my folks to complete. It needs a good sanding, test fit with pre-drilled holes, priming, and then painting, then a clear coat. Get disassembled and flat packed to be shipped across the country to my folks in Campbell River BC. That should be done by end of April if the weather gets nicer.
Wednesday – Hump Day – Middle of the Week Day! It’s here and cold, with lots of wind on the way. I will be glad that I cleared all of the brush yesterday morning, because more will fall out of the old trees today, believe you-me. I will end up needing to sharpen my hedge trimmer, Swede saw, secateurs and long handled loppers. Going to be a busy spring with lots of damaged limbs to prune back nicely, in an attempt to not let my trees, shrubs, and bushes become diseased or die. The ice, and wet heavy snow did a real number on all of our old growth Lilacs. I have an old Maple on the front lawn that’s been dropping branches and bark for a while now. It’ll have to come down within the next 3-5 years. Possibly sooner if the stripped bark causes additional issues. I’d love to have the main lower trunk cut into slabs for furniture builds for the house. Tables, chairs, and desks for both kids. I have plans for all that wood!!!
Greatwall Studios Graphic Design 