Stouffville, Ontario Canada (647) 962-1997 gwstudios@rogers.com M-F 8:30am - 2:30pm & 8:00pm - 11:00pm

Tag: preparations

The Urn Build : Finale Episode… sort of.

greatwallstudios1 Comment on The Urn Build : Finale Episode… sort of.

I have finally managed to get all three pieces built, sanded up to 800 grit, and now it has one coat of clear coat on it that has been buffed to a higher than usual (for me) sheen. I have it drying in the garage, where it can spend the next 36 hours off gassing before I hand it off. All that is left to add are the tiny rubber feet for the bottom, so as not to scuff the surface where it will reside.

I added one tiny step, by using a blow torch to add some colour, and visual texture to the central column. I am glad I did a test burn on some scrap red Oak, so that I could change my plan up a bit mid stream to work on the central column and not the cap/case topper. A darker base makes it feel more grounded, and less visually monotone. The grain pops with the Osmo finish I used, so it looks pretty sharp. I do like how the blue felt looks against the red/tan tones of the red oak. I could have gone a bit more fancy, by using dove tails or a box joint for the central column, but the butt joints are sturdy. So C’est la vie.

I will need to blow off the felt with my compressor to get rid of the dust, and add four feet, then it’s off to the future resident. Tick that one off the to-do list!

No finish, but assembled.
Lid off central column with tray still inside.
Lid, central column and removable tray.
All three pieces with clear coat finish applied.

Needs a touch more clean up, and out the door it goes! Happy Easter weekend everybody!

Second wood working job of 2023.

greatwallstudiosLeave a Comment on Second wood working job of 2023.

I have been asked to build a Wooden Urn in three pieces. A base, a nested low profile tray, and a highly polished outer cover, that shows off some of the base. The base will have rubber feet. The tray will be lined in felt. The whole outer shell polished to a high sheen, and clear coated. It’s for an extended family member. At least they get to choose the specifications and fit n’ finish. Perhaps have it in their ownership for a while before they need to use it. I’m hoping this isn’t a race against the clock type of thing. There may be a question of stains, and wood type, but I think Spalted Maple or Ash would be classic looking, and stain nicely. Plus I have lots of it, and won’t need to charge through the nose for acquiring it either.

Some decisions to make before I begin: use the wood I have on hand (Spalted Maple or Ash) or purchase a darker hard wood (added cost) what colour felt to line the low profile tray: Burgundy, Yellow, Blue or Green. Any possible stain colour for the base portion, unless we go bare wood and a clear coat finish. Any additional details to include or forgo.

Some brief time spent doing research has led me to build something along the lines of the below. Classy without being obnoxious or ostentatious.

The three portions of the build. Outer cover, urn and low profile tray.
Where I realize the base is meant to show, and I need to order rubber feet.

The first project, is a moose fence topper I’m making for my mum. I have it all cut out, but I need to sand & paint it. Then ship it out to Campbell River in pieces. I’ve been really busy as of late with my day job, and the winter temperatures makes working in the shop less than ideal, but the Urn is a big deal, so I may just brave it. Plus we are getting ever closer to the February thaw, and I would like to spend some time in the shop again. Not certain what this will do to my VF-1 Valkyrie time line, but that can wait. This is a matter of death after all.